Back by popular demand, our 18” and 19” EC-7 Mustang wheels are available in both staggered and rotatable square fitments, providing S197 and S550 enthusiasts alike with lightweight, flow formed solutions to meet your specific needs...
The EC-7 design offers industry-leading brake clearance, effectively clearing all factory brakes and aftermarket big brake kits that we have come across. Do not be forced into running larger diameter wheels than desired due to inferior brake clearance. The 18” EC-7’s clear the S197 14” & 15” GT500 Brembo brakes and S550 Performance Package brakes, in addition to many aftermarket big brake kits like the StopTech 6 piston 380mm kit or the Essex AP kits. The 19” EC-7’s provide superior clearance for the massive GT350 Brembo BBK. More than most wheels on the market today - including twice the barrel clearance to the OEM GT350 and uber-expensive GT350 R carbon fiber wheels.
This Group Buy conveniently offers accessories like TPMS, color-matched metal valve stems, and ARP extended wheel studs. This deal allows Mustang enthusiasts around the world to “Gang Up” for a chance to receive the largest discount offered on our 18” & 19” wheels. The more enthusiasts that pledge, the greater the discount will be. With the ability to set a minimum required discount, there is no risk in signing up early, as orders will only be processed if we unlock your desired discount.
¹18x9.5" ET35 not available in Anthracite
²18x9.5" ET35 and 18x10" ET40 not available in Matte Bronze
We’ve done countless hours of test-fitting to come up with the perfect chassis-specific widths and offsets. Whether you’re looking for a clean and conservative OEM+ fitment or an all-out aggressive track/race setup, we’ve got you covered. Check out our fitment guides below.
Don’t see your chassis listed? Use the "Message Vendor" button to contact one of our Porsche Product Experts.
Fit Matters
The right solution for every application
An optimized car setup begins with the right wheel and tire fitment, and without model-specific attention, maximum performance is compromised. These wheels are developed specifically for S197 and S550 chassis, and will work in either square or staggered applications.
Brake Clearance - Spokes
Spokes that work for you
The EC-7 design offers industry leading brake clearance, effectively clearing all factory brakes and aftermarket big brake kits that we have come across. Do not be forced into running larger diameter wheels than desired due to inferior brake clearance. The 18” EC-7’s clear the S197 14” & 15” GT500 Brembo brakes and S550 Performance Package brakes, in addition to many aftermarket big brake kits like the StopTech 6 piston 380mm kit. The 19” EC-7’s provide superior clearance to the massive GT350 Brembo BBK than most wheels on the market today - including the OEM GT350 and uber expensive GT350 R carbon fiber wheels.
Brake Clearance - Barrel
A lot of room in a tight space
Designing a wheel with spokes that clear a Big Brake Kit, is only half of the battle. The inside of the barrel needs to be large enough to physically fit large calipers and rotors. Be warned— not all wheels are made equal. The barrel of the EC-7 wheel offers unmatched caliper clearance because wheels shouldn’t limit your choice of aftermarket brake kits, and brake kits shouldn’t force you to run oversized wheels. We 2D modeled most Big Brake Kits available in Solidworks and tweaked the wheel design of the EC-7 prior to production in order to fit as many kits as possible. Contact us to confirm brake clearances for your specific application.
Face Profiles
One design, many levels of beauty
The EC-7 wheel is manufactured in three increasingly-concave face profiles; The shallowest face provides increased caliper clearance on narrow applications, while the deepest concave face reduces weight and creates a stunningly aggressive appearance on low offset and wide-width applications. This Mustang application utilizes our medium profile for the best balance between caliper clearance, concavity, and weight.
Spokes
More than just a pretty face
The curved spokes of the EC-7 serve many purposes, both in terms of form and function. The split "Y" spokes were carefully evaluated from every aspect to ensure light weight and remarkable strength. Their curved design increases brake calipers in almost every application, allowing the EC-7 to fit where the ARC-8 design simply cannot. The unique curvature of each face profile reduces center pad material as they are optimally selected for each unique width and offset. The lack of a deep front lip and spokes that connect directly to the barrel's lip, producing a rigid wheel with even load distribution.
Hub Center
Form follows function
Race wheels can't just be light, they need to function in a high performance environment. Unlike the narrow lug recesses of most other wheels, the EC-7 wheel features bored-out lug recesses that easily accommodate over-sized race lugs and beefy impact sockets. We don’t force you to compromise with narrow aftermarket tuner nuts and sockets. This allows for quick and easy wheel changes and prevents chips and scratches from tools.
Hub Centric
No rings or adapters here
All APEX EC-7 wheels are purpose built for select vehicle applications, and centering rings are never required for any Mustang S197 or S550 application. All 5x114.3mm bolt pattern wheels feature a direct-fit, 70.5mm center bore.
Center Cap
A factory fit and finish
We don't reuse one cap design for all of our wheels. Every EC-7 wheel is designed to work with factory center caps. You can easily replace APEX center caps with OEM Ford center caps for a clean factory look. The EC-7 wheels will ship with our Gloss Black center cap that mimics the size and shape of a Ford factory center cap.
APEX EC-7 Mustang wheels fit the following OEM Center Caps:
M-1096-K
1R3Z-1130-AA
Wheel Hardware
Original or Aftermarket, it all works
The EC-7 wheel can be used with all OEM and aftermarket mounting hardware with a 60° tapered seat. Lug bolts, wheel locks, and stud conversion kits all work perfectly. The EC-7 wheel also accepts wheel spacers without issue. The shallow rear chamfer allows the wheel to remain hub centric even when 5mm flat spacers are used. The chamfer is deep enough to clear the chamfered lip found on some aftermarket spacers that would typically cause improper seating of the wheel and, therefore, wheel vibration.
TPMS Sensors
They all fit
TPMS sensors, which monitor tire pressure, are one piece of technology that can't be compromised. The attention to OEM compatibility on the EC-7 wheel doesn't end with center caps. All APEX wheels accept OEM and aftermarket equivalent TPMS sensors, and any standard sized metal or rubber valve stem.
Flow Forming
Benefits of forging, without the pain
These APEX wheels are produced using a manufacturing process known as flow forming. This process significantly reduces weight in the barrel, which has the greatest impact on rotational mass. During the manufacturing process, rollers apply high pressure to the inner barrel, compressing the aluminum into its final shape. This effectively eliminates porosity and aligns the grain structure of the metal, which increases tensile strength. The end result is a lightweight and extremely strong barrel that equals that of a traditional forged wheel at a fraction of the cost.
Testing & Certifications
Verifiable 3rd party testing
Many companies promote their wheels as being certified by the VIA when they actually aren’t. That’s like using the USDA logo on food without permission. APEX wheels get officially tested and registered by the VIA in Japan, and we have the proof to back it up. Learn more about false VIA claims.
Japan’s JWL is a commonly followed standard for wheel load ratings. Our flow formed wheels meet, and most exceed, their load rating requirements. Most manufacturers only meet the minimum while some don’t even do that. Check and verify load ratings before you buy. Learn more about wheels that aren’t JWL.
Weight & Strength Optimization
It's all in the details
Various design features were implemented to ensure that the EC-7 wheel design was light, but had even more strength to handle the abuses experienced in endurance racing. We began with a beefy, multi-spoke, one-piece design. We added reliefs in the mounting pad to remove weight between lug holes, where we could safely save weight. The design was then run through Finite Element Analysis (FEA) to further optimize the spoke and barrel design. The result is a lightweight wheel with extra strength in all the right places. Use the EC-7 with confidence. It’s over built for both street and track.
Finishes
Because being faster is just not enough
The EC-7 wheel is available in multiple finishes. All APEX wheels are finished using a comprehensive multi-stage liquid paint system over a powder coated base coat. Standard finishes include gloss-metallic finishes, and semi-gloss or matte finishes.
Often overlooked, painted or powder coated lug hole seats can cause hardware to loosen or begin the spread of paint chipping to more visible sections. The coating process of the EC-7 leaves lug holes, center bores and mounting pads untouched, which ensures proper fit and torque values.
Warranty
A wheel you can depend on
As of recent, all our wheels now come with a lifetime structural warranty and 1 year finish warranty, so you can be confident in your purchase. See here for full terms and conditions.
50% Off Replacement Wheels
Hit those berms like you don’t care
Do some serious damage to a wheel that’s not covered under warranty? No worries. Curb rash or even totally mangling a wheel in a car accident is covered by our APEX360° program. We offer replacements for wrecked wheels at 50% off our standard prices. See our full terms and conditions for more details.